eng_学術論文のバックアップ(No.31) - Yagyu Laboratory Kanto Gakuin Univ.

Papers †

Jae Young Lee, Youngjoo Kim, Chanseok Lee, Jae Gyung Lee, Hiromasa Yagyu, Osamu Tabata and Do-Nyun Kim: "Investigating the Sequence-dependent Mechanical Properties of DNA Nick for Applications in Twisted DNA Nanostructure Design", Nucleic Acids Research, accepted.
Hiromasa Yagyu: "Simulation of polymer resist", Kobunshi (in Japanese) Vol.67, No.9, pp.526-528 (2018).
Mao Hamamoto，Hiromasa Yagyu: "Study on Microfluidic Device for synthesis of gold nanoparticles dispersion in organic solvent", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.61, p.1-6 (2018).
Hiromasa Yagyu: "Simulation of the Effects of Filler Aggregation and Filler-Rubber Bond on Elongation Behavior of Filled Cross-linked Rubber by Coarse-grained Molecular Dynamics", Soft Materials Vol. 15 Issue 4, p.263-271 (2017).
Hiromasa Yagyu, Jae-Young Lee, Do-Nyun Kim, Osamu Tabata: "Coarse-Grained Molecular Dynamics Model of Double-Stranded DNA for DNA Nanostructure Design", The Journal of Physical Chemistry B (American Chemical Society) Vol. 121 Issue 19, p.5033-5039 (2017).
Hiromasa Yagyu, Yu Tanabe, Satoru Takano, Mao Hamamoto: "Continuous Flow Synthesis of Monodisperse Gold Nanoparticles by Liquid-phase Reduction Method on Glass Microfluidic Device", Micro & Nano Letters (The Institution of Engineering and Technology) Vol. 12 Issue 8, p.536-539 (2017).
Hiromasa Yagyu, Kokoro Hamamura, Daiki Moritsuka, Shohei Suzuki: "Fabrication Technology of Microfluidic Device for Preparation of Nanoparticles", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.33-38 (2016).
Takeshi Kikitsu, Hiromasa Yagyu: "Laser Microfabrication of Gold Nanoparticles Dispersed Polymer Films with Different Nanoparticle Size", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.27-32 (2016).
Hiromasa Yagyu, Takeshi Kikitsu: "Particle Size Dependence of the Laser Microfabrication of Gold Nanoparticles Dispersed in Polymer Resists", Journal of Micromechanics and Microengineering Vol.25 No.12, 125018(7pp) (2015).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of the Effects of Strain Rate on Tensile Stress of Crosslinked Rubber", Soft Materials Vol.13 Issue 4, p.263-270 (2015).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of Crosslinked Polymer Materials", Journal of the Molecular Simulation Society of Japan (in Japanese) Vol.16, p.174-180 (2014).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Analysis of Rubber Composite Materials with K Computer", Polyfile (in Japanese) Vol.51 No.599, p.44-48 (2014).
Hiromasa Yagyu: "Study of Interfacial Effect on Reinforcement of Nanofilled Crosslinked Rubber using Coarse-Grained Molecular Dynamics", Transactions of the JSME (in Japanese) Vol.80 No.810, p.CM0032 (2014).
Yoshikazu Hirai, Hiromasa Yagyu, Yoshihide Makino, Akio Uesugi, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Molecular Level Study of Negative Thick-Film Resist in MEMS by Employing a Coarse-Grained Molecular Dynamics Simulation ", IEEJ Transactions on Sensors and Micromachines Vol.133 No.9, p.320-329 (2013).
Hiromasa Yagyu, Yoshikazu Hirai, Akio Uesugi, Yoshihide Makino, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Mechanical Property Simulation of Epoxy-Based Chemically-Amplified Resist by Coarse-Grained Molecular Dynamics", Polymer Vol.53, p.4834-4842 (2012).
Hiromasa Yagyu:"Visible Laser Microfabrication of Transparent Plastic with Au Nanoparticle Dispersed Polymer Film", Journal of Materials Processing Technology Vol.210, p.1153-1158 (2010).
Hiromasa Yagyu, Takayuki Utsumi: "Coarse-Grained Molecular Dynamics Simulations of Nanofilled Crosslinked Rubber", Computational Materials Science Vol.46 Issue 2, p.286-292 (2009).
Hiromasa Yagyu, Osamu Tabata: "The Effect of Polymer Matrix on Laser Microfabricaton of Au Nanoparticle Dispersed Polymer Resists", Applied Surface Science Vol.255 No. 5 Part 1, p.2237-2243 (2008).
Hiromasa Yagyu, Osamu Tabata: "Three-Dimensional Micropowder Blasting Simulation using Cellular Automaton", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.18 No. 5, 055010(9pp) (2009).
Hiromasa Yagyu, Osamu Tabata: "Cellular Automaton Simulation of Micropowder Blasting with Mask Erosion", Transaction on Electrical and Electronic Engineering (IEEJ) Vol.2 No. 3, p.348-356 (2007).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Fabrication of Plastic Micro Tip Array using Laser Micromachining of Nanoparticles Dispersed Polymer and Micromolding", Transactions on Sensors and Micromachines (IEEJ) Vol. 126-E No. 1, p.7-13 (2006).
Hiromasa Yagyu, Koji Sugano, Shigehiko Hayashi, Osamu Tabata: "Micropowder Blasting using Nanoparticles Dispersed Polymer Mask for Rapid Prototyping of Glass Chip", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.15 No.6, p.1236-1241 (2005).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Application of Nanoparticles Dispersed Polymer to Micropowder Blasting Mask", Journal of Microelectromechanical Systems (IEEE/ASME), Vol.13 No.1, p.1-6 (2004).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Laser Micromachining Technique of Nano-Particles Dispersed Polymer", Transactions on Sensors and Micromachines (IEEJ) (in Japanese) Vol.123-E No.10, p.429-435 (2003).
Hiromasa Yagyu, Shigehiko Hayashi: "Micro-Machining of Nano-Sized Particles Dispersed Films", Engineering Materials (in Japanese) Vol.57 No.10, p. 57-60 (2002).