eng_学術論文のバックアップ(No.32) - Yagyu Laboratory Kanto Gakuin Univ.

Papers †

Mao Hamamoto，Yiyang Liang, Hiromasa Yagyu: "Synthesis of Gold Nanoparticles Dispersion in Organic Solvent using Immiscible Fluid Flow in Microfluidics", IEEJ Transactions on Sensors and Micromachines (in Japanese) Vol. 139 No. 5, (2019), accepted.
Jae Young Lee, Youngjoo Kim, Chanseok Lee, Jae Gyung Lee, Hiromasa Yagyu, Osamu Tabata and Do-Nyun Kim: "Investigating the Sequence-dependent Mechanical Properties of DNA Nick for Applications in Twisted DNA Nanostructure Design", Nucleic Acids Research, accepted.
Hiromasa Yagyu: "Simulation of polymer resist", Kobunshi (in Japanese) Vol.67, No.9, pp.526-528 (2018).
Mao Hamamoto，Hiromasa Yagyu: "Study on Microfluidic Device for synthesis of gold nanoparticles dispersion in organic solvent", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.61, p.1-6 (2018).
Hiromasa Yagyu: "Simulation of the Effects of Filler Aggregation and Filler-Rubber Bond on Elongation Behavior of Filled Cross-linked Rubber by Coarse-grained Molecular Dynamics", Soft Materials Vol. 15 Issue 4, p.263-271 (2017).
Hiromasa Yagyu, Jae-Young Lee, Do-Nyun Kim, Osamu Tabata: "Coarse-Grained Molecular Dynamics Model of Double-Stranded DNA for DNA Nanostructure Design", The Journal of Physical Chemistry B (American Chemical Society) Vol. 121 Issue 19, p.5033-5039 (2017).
Hiromasa Yagyu, Yu Tanabe, Satoru Takano, Mao Hamamoto: "Continuous Flow Synthesis of Monodisperse Gold Nanoparticles by Liquid-phase Reduction Method on Glass Microfluidic Device", Micro & Nano Letters (The Institution of Engineering and Technology) Vol. 12 Issue 8, p.536-539 (2017).
Hiromasa Yagyu, Kokoro Hamamura, Daiki Moritsuka, Shohei Suzuki: "Fabrication Technology of Microfluidic Device for Preparation of Nanoparticles", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.33-38 (2016).
Takeshi Kikitsu, Hiromasa Yagyu: "Laser Microfabrication of Gold Nanoparticles Dispersed Polymer Films with Different Nanoparticle Size", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.27-32 (2016).
Hiromasa Yagyu, Takeshi Kikitsu: "Particle Size Dependence of the Laser Microfabrication of Gold Nanoparticles Dispersed in Polymer Resists", Journal of Micromechanics and Microengineering Vol.25 No.12, 125018(7pp) (2015).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of the Effects of Strain Rate on Tensile Stress of Crosslinked Rubber", Soft Materials Vol.13 Issue 4, p.263-270 (2015).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of Crosslinked Polymer Materials", Journal of the Molecular Simulation Society of Japan (in Japanese) Vol.16, p.174-180 (2014).
Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Analysis of Rubber Composite Materials with K Computer", Polyfile (in Japanese) Vol.51 No.599, p.44-48 (2014).
Hiromasa Yagyu: "Study of Interfacial Effect on Reinforcement of Nanofilled Crosslinked Rubber using Coarse-Grained Molecular Dynamics", Transactions of the JSME (in Japanese) Vol.80 No.810, p.CM0032 (2014).
Yoshikazu Hirai, Hiromasa Yagyu, Yoshihide Makino, Akio Uesugi, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Molecular Level Study of Negative Thick-Film Resist in MEMS by Employing a Coarse-Grained Molecular Dynamics Simulation ", IEEJ Transactions on Sensors and Micromachines (in Japanese) Vol.133 No.9, p.320-329 (2013).
Hiromasa Yagyu, Yoshikazu Hirai, Akio Uesugi, Yoshihide Makino, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Mechanical Property Simulation of Epoxy-Based Chemically-Amplified Resist by Coarse-Grained Molecular Dynamics", Polymer Vol.53, p.4834-4842 (2012).
Hiromasa Yagyu:"Visible Laser Microfabrication of Transparent Plastic with Au Nanoparticle Dispersed Polymer Film", Journal of Materials Processing Technology Vol.210, p.1153-1158 (2010).
Hiromasa Yagyu, Takayuki Utsumi: "Coarse-Grained Molecular Dynamics Simulations of Nanofilled Crosslinked Rubber", Computational Materials Science Vol.46 Issue 2, p.286-292 (2009).
Hiromasa Yagyu, Osamu Tabata: "The Effect of Polymer Matrix on Laser Microfabricaton of Au Nanoparticle Dispersed Polymer Resists", Applied Surface Science Vol.255 No. 5 Part 1, p.2237-2243 (2008).
Hiromasa Yagyu, Osamu Tabata: "Three-Dimensional Micropowder Blasting Simulation using Cellular Automaton", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.18 No. 5, 055010(9pp) (2009).
Hiromasa Yagyu, Osamu Tabata: "Cellular Automaton Simulation of Micropowder Blasting with Mask Erosion", Transaction on Electrical and Electronic Engineering (IEEJ) Vol.2 No. 3, p.348-356 (2007).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Fabrication of Plastic Micro Tip Array using Laser Micromachining of Nanoparticles Dispersed Polymer and Micromolding", Transactions on Sensors and Micromachines (IEEJ) Vol. 126-E No. 1, p.7-13 (2006).
Hiromasa Yagyu, Koji Sugano, Shigehiko Hayashi, Osamu Tabata: "Micropowder Blasting using Nanoparticles Dispersed Polymer Mask for Rapid Prototyping of Glass Chip", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.15 No.6, p.1236-1241 (2005).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Application of Nanoparticles Dispersed Polymer to Micropowder Blasting Mask", Journal of Microelectromechanical Systems (IEEE/ASME), Vol.13 No.1, p.1-6 (2004).
Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Laser Micromachining Technique of Nano-Particles Dispersed Polymer", Transactions on Sensors and Micromachines (IEEJ) (in Japanese) Vol.123-E No.10, p.429-435 (2003).
Hiromasa Yagyu, Shigehiko Hayashi: "Micro-Machining of Nano-Sized Particles Dispersed Films", Engineering Materials (in Japanese) Vol.57 No.10, p. 57-60 (2002).