Papers

  1. Mikinari Takada, Mao Hamamoto, Hiromasa Yagyu: "Processing Cross-sectional Shape Control of Micropowder Blasting using Dynamic Viscoelasticity of Mask", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.65, pp.41-45.

  2. Mao Hamamoto, Hiromasa Yagyu: "Synthesis of Gold Nanoparticles Dispersion in Organic Solvent using Microfluidics", Engineering Materials (in Japanese), Vol.70 No.1, pp. 76-79 (2022).

  3. Hiromasa Yagyu, Mao Hamamoto, Yuanwei Wang: "Analyzing the Critical Mixing Time for the Liquid-Phase Reduction Synthesis of Monodisperse Gold Nanoparticles using Glass Microfluidics", Microfluidics and Nanofluidics, Vol.26, pp.1-8 (2022). [abstract]. (IF 2.529)

  4. Mao Hamamoto, Yiyang Liang, Hiromasa Yagyu: "Synthesis of Gold Nanoparticles Dispersion in Toluene using Immiscible Fluid Flow in Microfluidic Device", Electronics and Communications in Japan, 102, pp.48-54 (2019).[abstract] (IF 0.324)

  5. Mao HamamotoYiyang Liang, Hiromasa Yagyu: "Synthesis of Gold Nanoparticles Dispersion in Organic Solvent using Immiscible Fluid Flow in Microfluidics", IEEJ Transactions on Sensors and Micromachines (in Japanese) Vol. 139 No. 5, p.109-113 (2019). [abstract]

  6. Jae Young Lee, Youngjoo Kim, Chanseok Lee, Jae Gyung Lee, Hiromasa Yagyu, Osamu Tabata, Do-Nyun Kim: "Investigating the Sequence-dependent Mechanical Properties of DNA Nick for Applications in Twisted DNA Nanostructure Design", Nucleic Acids Research, Vol.47, p.93-102 (2019).(IF 16.971). [abstract]

  7. Hiromasa Yagyu: "Simulation of polymer resist", Kobunshi (in Japanese) Vol.67, No.9, pp.526-528 (2018).

  8. Mao HamamotoHiromasa Yagyu: "Study on Microfluidic Device for synthesis of gold nanoparticles dispersion in organic solvent", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.61, p.1-6 (2018).

  9. Hiromasa Yagyu: "Simulation of the Effects of Filler Aggregation and Filler-Rubber Bond on Elongation Behavior of Filled Cross-linked Rubber by Coarse-grained Molecular Dynamics", Soft Materials Vol. 15 Issue 4, p.263-271 (2017) (IF 2.429). [abstract]

  10. Hiromasa Yagyu, Jae-Young Lee, Do-Nyun Kim, Osamu Tabata: "Coarse-Grained Molecular Dynamics Model of Double-Stranded DNA for DNA Nanostructure Design", The Journal of Physical Chemistry B (American Chemical Society) Vol. 121 Issue 19, p.5033-5039 (2017) (IF 3.177). [abstarct]

  11. Hiromasa Yagyu, Yu Tanabe, Satoru Takano, Mao Hamamoto: "Continuous Flow Synthesis of Monodisperse Gold Nanoparticles by Liquid-phase Reduction Method on Glass Microfluidic Device", Micro & Nano Letters (The Institution of Engineering and Technology) Vol. 12 Issue 8, p.536-539 (2017) (IF 0.723). [abstract]

  12. Hiromasa Yagyu, Kokoro Hamamura, Daiki Moritsuka, Shohei Suzuki: "Fabrication Technology of Microfluidic Device for Preparation of Nanoparticles", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.33-38 (2016).

  13. Takeshi Kikitsu, Hiromasa Yagyu: "Laser Microfabrication of Gold Nanoparticles Dispersed Polymer Films with Different Nanoparticle Size", The Journal of Technnological Researches. Society of Science and Engineering / Architecture and Environmental Design, Kanto Gakuin University (in Japanese) Vol.59, p.27-32 (2016).

  14. Hiromasa Yagyu, Takeshi Kikitsu: "Particle Size Dependence of the Laser Microfabrication of Gold Nanoparticles Dispersed in Polymer Resists", Journal of Micromechanics and Microengineering Vol.25 No.12, 125018(7pp) (2015) (IF 1.881). [abstract]

  15. Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of the Effects of Strain Rate on Tensile Stress of Crosslinked Rubber", Soft Materials Vol.13 Issue 4, p.263-270 (2015) (IF 2.429). [abstract]

  16. Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Simulation of Crosslinked Polymer Materials", Journal of the Molecular Simulation Society of Japan (in Japanese) Vol.16, p.174-180 (2014).

  17. Hiromasa Yagyu: "Coarse-grained Molecular Dynamics Analysis of Rubber Composite Materials with K Computer", Polyfile (in Japanese) Vol.51 No.599, p.44-48 (2014).

  18. Hiromasa Yagyu: "Study of Interfacial Effect on Reinforcement of Nanofilled Crosslinked Rubber using Coarse-Grained Molecular Dynamics", Transactions of the JSME (in Japanese) Vol.80 No.810, p.CM0032 (2014).

  19. Yoshikazu Hirai, Hiromasa Yagyu, Yoshihide Makino, Akio Uesugi, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Molecular Level Study of Negative Thick-Film Resist in MEMS by Employing a Coarse-Grained Molecular Dynamics Simulation ", IEEJ Transactions on Sensors and Micromachines (in Japanese) Vol.133 No.9, p.320-329 (2013).

  20. Hiromasa Yagyu, Yoshikazu Hirai, Akio Uesugi, Yoshihide Makino, Koji Sugano, Toshiyuki Tsuchiya, Osamu Tabata: "Simulation of Mechanical Property of Epoxy-Based Chemically-Amplified Resist by Coarse-Grained Molecular Dynamics", Polymer Vol.53, p.4834-4842 (2012) (IF 4.430). [abstract]

  21. Hiromasa Yagyu:"Visible Laser Microfabrication of Transparent Plastic with Au Nanoparticle Dispersed Polymer Film", Journal of Materials Processing Technology Vol.210, p.1153-1158 (2010) (IF 5.551). [abstract]

  22. Hiromasa Yagyu, Takayuki Utsumi: "Coarse-Grained Molecular Dynamics Simulations of Nanofilled Crosslinked Rubber", Computational Materials Science Vol.46 Issue 2, p.286-292 (2009) (IF 3.300). [abstract]

  23. Hiromasa Yagyu, Osamu Tabata: "The Effect of Polymer Matrix on Laser Microfabricaton of Au Nanoparticle Dispersed Polymer Resists", Applied Surface Science Vol.255 No. 5 Part 1, p.2237-2243 (2008) (IF 6.707). [abstract]

  24. Hiromasa Yagyu, Osamu Tabata: "Three-Dimensional Micropowder Blasting Simulation using Cellular Automaton", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.18 No. 5, 055010(9pp) (2008) (IF 1.881). [abstract]

  25. Hiromasa Yagyu, Osamu Tabata: "Cellular Automaton Simulation of Micropowder Blasting with Mask Erosion", Transaction on Electrical and Electronic Engineering (IEEJ) Vol.2 No. 3, p.348-356 (2007) (IF 0.752). [abstract]

  26. Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Fabrication of Plastic Micro Tip Array using Laser Micromachining of Nanoparticles Dispersed Polymer and Micromolding", Transactions on Sensors and Micromachines (IEEJ) Vol. 126-E No. 1, p.7-13 (2006). [abstract]

  27. Hiromasa Yagyu, Koji Sugano, Shigehiko Hayashi, Osamu Tabata: "Micropowder Blasting using Nanoparticles Dispersed Polymer Mask for Rapid Prototyping of Glass Chip", Journal of Micromechanics and Microengineering (Institute of Physics) Vol.15 No.6, p.1236-1241 (2005) (IF 1.881). [abstract]

  28. Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Application of Nanoparticles Dispersed Polymer to Micropowder Blasting Mask", Journal of Microelectromechanical Systems (IEEE/ASME) Vol.13 No.1, p.1-6 (2004) (IF 2.417). [abstract]

  29. Hiromasa Yagyu, Shigehiko Hayashi, Osamu Tabata: "Laser Micromachining Technique of Nano-Particles Dispersed Polymer", Transactions on Sensors and Micromachines (IEEJ) (in Japanese) Vol.123-E No.10, p.429-435 (2003).

  30. Hiromasa Yagyu, Shigehiko Hayashi: "Micro-Machining of Nano-Sized Particles Dispersed Films", Engineering Materials (in Japanese) Vol.57 No.10, p. 57-60 (2002).


トップ   編集 凍結解除 差分 バックアップ 添付 複製 名前変更 リロード   新規 一覧 単語検索 最終更新   ヘルプ   最終更新のRSS
Last-modified: 2022-06-01 (水) 19:09:36 (35d)